A full sheet, in one setup
1300 × 2500 mm table format with 200 mm Z working area for cabinet panels, doors and decorative reliefs.
Woodworking CNCSupplied STYLECNC STM1325-R3 equipment photos: three-quarter and front views. Pictured accessories are for reference; confirm the final configuration.
STYLECNC / STM1325-R3
STM1325-R3 Rotary CNC Router
Full-sheet capability. A new dimension of carving.
A 1325-format CNC router with a 1300 × 2500 × 200 mm working area, 3 kW water-cooled spindle and 200 mm diameter rotary axis. Designed for furniture, cabinet panels, relief carving, signs and cylindrical workpieces. Controller and rotary linkage configuration must be confirmed before ordering.
Wood · Acrylic · Foam · Mold materialsDocument reference priceUSD 5,380–6,580
Reference range in the supplied document; not a current quotation. Options, shipping and applicable taxes must be confirmed.
01
Working area1300 × 2500 × 200 mm
02
Spindle / laser power3 kW
03
Positioning accuracy±0.03 / 300 mm
STYLECNC / STM1325-R3
Overview
Flat panels to cylindrical parts
A 200 mm diameter rotary axis expands applications to furniture legs, figures and cylindrical carving. Confirm the actual axis coordination mode with the controller selection.
A guided, rigid drive system
HIWIN #25 square guides, X/Y helical racks and a Z-axis TBI ballscrew are listed in the configuration.
Offline operation and recovery
The document describes DSP operation, processing memory, breakpoint recovery and parameter backup. Availability depends on the confirmed control system.
Working envelope & accuracy
| Specification | Value |
|---|---|
| Table format | 4 × 8 ft / 48 × 96 in / 1300 × 2500 mm |
| Working area (X × Y × Z) | 1300 × 2500 × 200 mm |
| Travel positioning accuracy | ±0.03 / 300 mm |
| Repeat positioning accuracy | ±0.03 mm |
| X/Y resolution | <0.01 mm |
| Rotary axis diameter | 200 mm |
Spindle & motion
| Specification | Value |
|---|---|
| Spindle | 3 kW water-cooled; Italy HSD optional |
| Spindle speed | 0–24,000 rpm |
| Maximum rapid speed | 20,000 mm/min |
| Maximum working speed | 15,000 mm/min |
| Collet | ER20 |
| Inverter | 3.7 kW Fuling |
Structure & drive
| Specification | Value |
|---|---|
| Machine frame | Welded structure |
| Table surface | T-slot; vacuum table optional |
| X/Y transmission | Helical rack; Taiwan HIWIN linear bearings |
| Z transmission | HIWIN linear bearings; TBI ballscrew |
| Drive motors | Lead shine |
| Lubrication | Manual |
Controls & software
| Specification | Value |
|---|---|
| Operating system | DSP; Ncstudio / Mach3 optional |
| Listed controller | RichAuto A11 DSP |
| Command language | G Code |
| Computer interface | USB |
| Compatible software listed | Type3 / Ucancam / Artcam |
| Limit switch | OMRON |
Electrical & environment
| Specification | Value |
|---|---|
| Power consumption, excluding spindle | 3.2 kW |
| Working voltage | AC 380 V, 50/60 Hz, 3-phase; 220 V optional |
| Ambient temperature | 0–45 °C |
| Relative humidity | 30%–75% |
Configuration to confirm
The document discusses both four-axis simultaneous machining and a substitutable rotary axis, while listing a RichAuto A11 controller. It does not resolve the exact supplied linkage mode. Confirm X/Y/Z/A coordination, controller, rotary mounting, spindle and ATC compatibility in the final configuration.
Standard
Standard equipment
1325-format table & rotary axis
T-slot table, 1300 × 2500 × 200 mm working area and 200 mm diameter rotary axis.
Spindle & inverter
3 kW water-cooled spindle, 24,000 rpm maximum, 3.7 kW Fuling inverter.
Guides & transmission
HIWIN #25 guides, helical X/Y racks and TBI Z ballscrew.
Setup & maintenance fittings
Manual lubrication, tool sensor calibration, OMRON limit switches and flexible fire-resistant cables are listed.
Wood · Acrylic · Foam · Mold materials
Applications
Furniture & cabinetry
Cabinets, solid-wood doors, wardrobes, tables, beds, furniture legs, decorative panels and wood crafts.
Signs & advertising
Signs, logos, acrylic cutting, plastic forming and decorative products.
Molds & prototypes
The document lists wood, foam, EPS, copper and aluminum molds, artificial marble, sand, plastic sheets and PVC. Confirm tooling, feeds and spindle suitability for each material.
Relief & artistic carving
Large reliefs, shadow carving, cylindrical forms and craft projects.
STM1325-R3
Questions & answers
Does a rotary axis always mean simultaneous four-axis machining?
No. A substituted rotary axis may link only three axes; a coordinated X/Y/Z/A controller is required for simultaneous four-axis motion. The document covers both arrangements, so the supplied configuration needs confirmation.
Is the vacuum table included?
The standard table listed is a T-slot table. The vacuum table and vacuum pump are optional; a dust collector and ATC are also optional.
Equipment information
Compiled from the supplied STYLECNC STM1325-R3 equipment document. Brand names identify the documented manufacturer. The source mentions CE tests but supplies no certificates; any certification requirements must be verified. Specifications and availability require supplier confirmation.